home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / pc_board / vucals22.zip / VUCALS22.DOC < prev   
Text File  |  1992-01-18  |  8KB  |  163 lines

  1.  
  2.                                     VuCalls
  3.  
  4.     (c) 1988-1992, J.C. Kilday Associates, P.O Box 1961, Portland, ME 04104
  5.  
  6.                               Version 2.2, 1/19/92
  7.  
  8.      This is  a PCBoard  sysop's utility  for viewing  caller logs  without
  9.      logging  on  to  a  PCBoard.    It  is compatible with all versions of
  10.      PCBoard and  was orginally  developed for  those running  2 nodes on a
  11.      640K machine where only about  40K was available in a  3rd maintenance
  12.      partition.  However, even on contemporary systems VuCalls continues to
  13.      have broad general utility for all PCBoard 14.x sysops.  Here are some
  14.      of its features:
  15.  
  16.         - Simple to own, install, and operate (FREE, virtually no
  17.           installation, emulates PCBoard form and function).
  18.  
  19.         - Defaults to use of high-speed screen-writing/scrolling routines
  20.           and color display.
  21.  
  22.         - High-speed screen routines are Windows- and DESQview-aware.
  23.           (No bleed-thru if run in Non-stop mode in background on these
  24.           systems.)
  25.  
  26.         - Optional BIOS screen writing mode (with the /S parm) allows
  27.           output redirection (primarily to support operation from remote
  28.           under CTTY or a DOORWAY-type program redirecting output to the
  29.           comm port).
  30.  
  31.         - Text search feature (with repeat search) allows finding log
  32.           entries of particular interest quickly.
  33.  
  34.         - Color and highlighting emphasize some logged events.
  35.  
  36.         - Keyboard interface emulates PCBoard but provides extended
  37.           capabilities for more convenient review of log files.  The
  38.           HOME, END, PgDn, PgUp, up arrow, and down arrow keys operate
  39.           in a familiar way.
  40.  
  41.         - SHARE compatability supports multi-node operation.
  42.  
  43.      For simpler command entry, rename VUCALLS.COM to a name easier to
  44.      type such as VU.COM, or run it from batch files.
  45.  
  46.              Syntax:    VUCALLS [drive][path]CALLERfilename [/S]
  47.  
  48.      If no parms are entered on the command line, or an error is detected
  49.      with what has been entered, VuCalls displays an info (and syntax)
  50.      screen.  When started with a valid caller log, VuCalls displays the
  51.      log in the familiar manner of last entry first, from the top down on
  52.      the screen.  The prompt line is like that used by PCBoard v14.x
  53.      (although VuCalls is compatible with earlier PCBoard versions).  A
  54.      help screen is available by entering H.
  55.  
  56.      To help maintain "orientation" with respect to the travel direction
  57.      through the caller log, an arrow prints to the right of "VuCalls" on
  58.      the prompt line.  It always indicates the direction through the file
  59.      when the enter key is next struck, or a text search begun, etc.
  60.      Direction may be changed by entering a "+" or a "-" (or other keys
  61.      discussed next).   Should you elect to use the NS (Non-stop) command,
  62.      the fast scrolling may be stopped and the prompt line restored by
  63.      hitting Ctrl-K.
  64.  
  65.  
  66.      VuCalls v2.2 - 1/18/92                                       Page 2
  67.  
  68.      In addition to the familiar (Y)es, (N)o, (NS)non-stop, (+), and (-)
  69.      key commands, the following provide additional flexibility of
  70.      operation:
  71.              (B) - (B)eginning of file (earliest call logged on file)
  72.              (E) - (E)nd of file (last call logged)
  73.              (D) - (D)own one line (toward beginning of file)
  74.              (U) - (U)p one line
  75.              (S) - (S)earch for up to 30 characters of text from present
  76.                     position and in the established direction.
  77.              (R) - (R)epeat a search that was successfully completed as
  78.                        the preceding command.
  79.  
  80.      The keys/commands discussed so far are applicable to remote operation
  81.      (through CTTY, DOORWAY, etc.) as well as local.  For added convenience
  82.      in local mode only the following keys are active:
  83.  
  84.              Alt-S - same as (S)earch, but no enter key is needed.
  85.              Alt-R - same as (R)epeat search and acting without an enter.
  86.               HOME - Go to the beginning of file (earliest call logged).
  87.                END - Go to end of file.
  88.               PgDn - Scrolls a new page on screen toward beginning of file.
  89.               PgUp - Same, but toward end of file.
  90.         Down Arrow - Scrolls one line toward beginning of file.
  91.           Up Arrow - Same, but toward end of file.
  92.  
  93.  
  94.      Standard BIOS screen writing occurs when the /S parm is specified
  95.      following the caller log name.  VuCalls may be invoked in this mode
  96.      remotely.  A sysop may review logs, search for specific text in the
  97.      entries, etc., after logging on to the remote system, and dropping to
  98.      DOS under control of CTTY or other redirection software such as
  99.      DOORWAY.   Due to the line-at-a-time limitation of a CTTY environment,
  100.      VuCalls is designed to provide a scrolling display in only one
  101.      direction when the /S parm is used.   Therefore, despite the direction
  102.      of travel through a caller log when in BIOS screen write mode, the
  103.      display always scrolls upward to allow insertion of the next line at
  104.      the bottom of the screen.  Although initially disorienting when
  105.      changing directions while using from remote, a little practice makes
  106.      it a simple matter.  The help screen and search and repeat displays
  107.      are available from remote.
  108.  
  109.      This software is contributed for the use of PCBoard sysops who are
  110.      running PCBoard for personal, non-business use.   Rights to use this
  111.      software for business purposes may be obtained by contacting:
  112.  
  113.        J.C. Kilday Associates, Central Avenue, Peaks Island, ME 04108
  114.  
  115.      In return for the free use of this utility, you are encouraged to
  116.      communicate any problems or ideas for enhancements.  Or just let me
  117.      know if you appreciate VuCalls.  I may be reached as indicated below.
  118.      You also may call to check on later releases (which will be
  119.      downloadable to first-time callers).   Also note there is a companion
  120.      program called VuMsgs (to view MSGS files outside of PCBoard --
  121.      limited to v14.x).  It is distributed as VUMSGS22.ZIP.
  122.  
  123.                               Jack Kilday, Sysop
  124.                               The Northern Lights BBS
  125.                               207-761-4782   v.32bis (USR HST D/S), 4 nodes
  126.   
  127.  
  128.      VuCalls v2.2 - 1/18/92                                       Page 3
  129.  
  130.  
  131.      Revision History:
  132.  
  133.      11/30/85 - Original assembler-based release
  134.  
  135.      12/27/85 - Version 1.1
  136.                 Corrected bug which occasionally caused premature
  137.                 program termination.  Also, minor changes made to DOC.
  138.  
  139.       2/21/85 - Version 1.2
  140.                 Modified for compatibility with PCBoard v11.0.
  141.  
  142.       1/23/87 - Version 1.3 - Added network/file SHAREing support.
  143.  
  144.      11/25/88 - Version 2.0
  145.                 Completely rewrote the assembler version in Turbo C.
  146.                 Formerly a 1K .COM file, it is now a 15K executable which
  147.                 still runs in less than 40K while having considerable new
  148.                 functionality, color displays, and fast screen writes.
  149.  
  150.        7/1/89 - Version 2.1
  151.                 Compensated for Turbo C's terrible cycle sucking kbhit()
  152.                 function which severely slows systems running DESQview or
  153.                 DoubleDOS when VuCalls v2.0 awaiting a keystroke.  VuCalls
  154.                 now gives back cycles to other partitions when operating
  155.                 with these multitaskers.
  156.                 VuCalls now restores the original screen colors upon exit.
  157.  
  158.       1/18/92 - Version 2.2
  159.                 No functional changes in this version.  Re-compiled to
  160.                 show new author contact info (author & BBS moved) and
  161.                 released with VuMsgs v2.2 on same date (the companion
  162.                 VuMsgs DID have some functional changes).  Docs updated.
  163.